|
NOTE: [PDF] links require the Acrobat Reader from Adobe.
Browse by Keyword
Find Fiberglass Fabrication Topic Hub Links related to these keywords:
Acetone (3)
/
Air quality (1)
/
Aqueous cleaning (2)
/
Benchmarking (Management) (1)
/
Best management practices (2)
/
Boatbuilding (4)
/
Clean Air Act (2)
/
Cleaning (2)
/
Cleaning machinery and appliances (1)
/
Coating processes (6)
/
Coatings (1)
/
Compliance (6)
/
Composite materials (5)
/
Compressed air (2)
/
Corrosion resistant materials (1)
/
Cost savings (1)
/
Distillation (2)
/
Economic analysis (2)
/
Emission control (10)
/
Emissions (13)
/
Fiber reinforced plastics (15)
/
Fiberglass (18)
/
Hazardous substances (1)
/
Hazardous waste (1)
/
High volume low pressure spray guns (3)
/
Indiana (1)
/
Laminated materials (4)
/
Measurement (1)
/
Molding (Founding) (7)
/
Paint (4)
/
Powder coatings (1)
/
Regulations (7)
/
Ships (2)
/
Shipyards (1)
/
Solvents (8)
/
Spray guns (8)
/
Spraying equipment (11)
/
Storage tanks (2)
/
Styrene (11)
/
Substitute materials (3)
/
Volatile organic compounds (10)
/
Waste management (2)
/
Waste reduction (4)
/
Water based products (1)
/
Keyword: Fiber reinforced plastics, 15 Links
Calculating Air Emissions from Fiberglass Operations [PDF]
Abstract: Spreadsheet calculator for determining air emissions from fiberglass production, incorporates variables f low styrene, vapor-suppressed resins, molding or laminating process and other factors.
Source: Minnesota Pollution Control Agency
URL: http://www.pca.state.mn.us/industry/sbeg/fiberglass.pdf
Case Study: Fiber Reinforced Plastics Shop Implements Light RTM to Produce Parts [PDF]
Abstract: Case study of a shop that converted 60% of open molding to closed molding (15% of operations use light RTM molding). Styrene emissions reduced by 80%.
Source: Minnesota Technical Assistance Program
URL: http://www.mntap.umn.edu/fiber/41-Phoenix.PDF
Certified Composites Technology (CCT) Training
Abstract: Online curriculum and exam provides uniform training in technology fundamentals used in open molding for composites & marine products. Focus on gel coat application, spraying, laminating, quality, and safety.
Source: American Composites Manufacturers Association
URL: http://www.compositescertification.org/certification/
Composite Materials Technology Center
Abstract: Fosters interaction of engineering students with industry to enhance engineering education and assist industry in developing and implementing improved production processes.
Source: Winona State University
URL: http://www.winona.edu/engineering/COMTEC/Overview.htm
Composite Trimming and Drilling Process Improvement
Abstract: Evaluates recent advances in composite trimming and drilling for reduced cycle time and cost. (Free to SME members, $15 to non-members).
Source: Society of Manufacturing Engineers (SME)
URL: http://www.sme.org/cgi-bin/get-item.pl?MF03-264&2&SME&
Controlled Spraying Handbook - Composites Open Molding Spray Applications [PDF]
Abstract: (For purchase) Provides training guidelines for spray operators in the open molding companies industry, where styrene based resin and gel coat materials are used.
Source: Composites Fiber Association
URL: http://www.acmanet.org/ga/Controlled_Spray_Handbook.pdf
Emissions from Composites Open Molding Operations [PDF]
Abstract: Contains many resources regarding emissions from open molding fiberglass operations, including the "Unified Emission Factors", a calculator, and other reports and info.
Source: Composites Fabricators Association
URL: http://www.cfa-hq.org/ga/cfamodelreport.pdf
EPA Sector Notebook: Profile of the Plastic Resins and Man-Made Fibers Industry
Abstract: Provides information about process inputs and outputs, and environmental and regulatory implications of these materials and fiberglass processes.
Source: U.S. Environmental Protection Agency
URL: http://www.epa.gov/compliance/resources/publications/assistance/sectors/notebooks/plastic.html
Fiberglass - Pollution Prevention and General Information
Abstract: Offers information and resources on managing fiberglass fabrication wastes, regulatory issues, less-polluting alternative materials and processes, and links to additional resources.
Source: Minnesota Technical Assistance Project
URL: http://mntap.umn.edu/fiber/index.htm
Fiberglass Reinforced Plastics (FRP) Manufacturing
Abstract: Provides information on air emission issues (including styrene and other HAPs), compliance issues, pollution prevention resources and other FRP related issues.
Source: Indiana Department of Environmental Management
URL: http://www.in.gov/idem/5130.htm
Lean and Environment Case Study: Lasco Bathware [PDF]
Abstract: A team worked to identify numerous productivity and environmental improvements at this bathware manufacturing facility, via integration of lean and P2. Annual savings are over $140k.
Source: Washington Dept of Ecology
URL: http://www.ecy.wa.gov/pubs/0704009.pdf
Pollution Solutions - Fiberglass Operations
Abstract: Provides specific recommendations for preventing pollution in fiberglass operations, covering housekeeping, equipment & processes, materials, and inventory.
Source: University of Missouri Lincoln University
URL: http://extension.missouri.edu/polsol/fbrgls.htm
Reducing Volatile Emissions in the Fiber Reinforced Plastics (FRP) Industry [PDF]
Abstract: Describes options available to reduce acetone and styrene emissions
Source: Minnesota Technical Assistance Program
URL: http://www.mntap.umn.edu/fiber/75-FRPemissions.PDF
Reports on FRP and Light-RTM Manufacturing Technologies Tested at the Coatings Applications Research Laboratory (CARL)
Abstract: Series of reports on various fiberglass technologies that may reduce emissions and waste related to fiberglass processes.
Source: Coatings Applications Research Laboratory (CARL)
URL: https://Engineering.Purdue.edu/CMTI/FRP/
Solvent Substitution to Reduce Air Emissions for the FRP Industry [PDF]
Abstract: Provides information and guidance on evaluating alternatives to solvents used in tool and equipment cleaning for FRP production, to help prevent toxic air emissions.
Source: North Carolina Pollution Prevention Program
URL: http://www.p2pays.org/ref/01/00904.pdf
Search Tips:
You may search for links by typing text in the search box. This starts a search
of fields in the links database including title, source and description.
If you aren't finding a specific resource try:
- typing one word from the title in the search box
- typing one word from the name of the source in the search box
If you aren't finding a link that generally relates to your questions, try:
- using alternate or more general terms in the search box
- using one descriptive word rather than multiple words
Please let us know if you couldn't find what you wanted or if you want to suggest
a new link:
Suggest a Link
Ask for Help
|
