Browse by Keyword

Fiberglass Fabrication: Browse by Keyword
Table of Contents
Background and Overview
Glossary of Terms
Operations
Reasons for Change
P2 Opportunities
(NEW!) Styrene Issues in Fiberglass Fabication
Where To Go for P2 Help
Acknowledgments
Complete List of Links

Keywords:
Acetone / Air filters / Air quality / Aqueous cleaning / Benchmarking (Management) / Best management practices / Boatbuilding / Catalysts / Clean Air Act / Cleaning / Cleaning machinery and appliances / Coating processes / Compliance / Composite materials / Compressed air / Corrosion resistant materials / Distillation / Economic analysis / Emission control / Emissions / Fiber reinforced plastics / Fiberglass / Hazardous substances / Hazardous waste / High volume low pressure spray guns / Indiana / Laminated materials / Measurement / Molding (Founding) / Paint / Plastics / Powder coatings / Ships / Shipyards / Solvents / Spray guns / Spraying equipment / Storage tanks / Styrene / Substitute materials / Ventilation / Volatile organic compounds / Waste management / Waste reduction / Water based products


Alphabetical Listing of Reference Documents by Title
NOTE: [PDF] links require Acrobat Reader from Adobe.

Case Study - Grady White Boats [PDF]
Abstract: Case study on how a company replaced conventional air guns with air-assisted airless spray guns to apply gel coating.
Source: North Carolina Pollution Prevention Program
URL: http://infohouse.p2ric.org/ref/01/0034352.pdf

Code of Federal Regulations: Title 40 Part 63 Subpart VVVV
Abstract: This subpart establishes national emission standards for hazardous air pollutants (HAP) for new and existing boat manufacturing facilities with resin and gel coat operations, carpet and fabric adhesive operations, or aluminum recreational boat surface coating operations.
Source: GPO Access
URL: http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&rgn=div
6&view=text&node=40:12.0.1.1.1.28&idno=40

Establishing Waste Reduction Benchmarks and Good Manufacturing Practice for Open Mold Laminating [PDF]
Abstract: This paper illustrates how to use planned experientation to establish benchmarks for good operating practices and cost reductions in a fiberglass laminating facility.
Source: North Carolina Office of Waste Prevention
URL: http://infohouse.p2ric.org/ref/01/00372.pdf

Hatteras Yachts, Inc.
Abstract: Case study of a boat builder that reduced paint and clean-up solvent waste by installing a plural component paint spraying system.
Source: North Carolina Office of Waste Reduction
URL:

Hazards of Fiberglass Layup and Sprayup [PDF]
Abstract: Booklet provides recommended work practices and case studies to minimize employee exposure to airborne contaminants, noise, and dermal affects.
Source: Minnesota Department of Labor and Industry
URL: http://www.dli.mn.gov/OSHA/PDF/fiberglass.pdf

Pollution Prevention Assistance Tools for the Fiber Reinforced Plastics and Boat Manufacturing Industries
Abstract: Demonstration projects showed success of methods and technologies for FRP shops with an emphasis on open molders, via assistance with implementation or adoption to 3 shops.
Source: Minnesota Technical Assistance Program
URL: http://infohouse.p2ric.org/ref/26/25282.htm

Solvent Substitution to Reduce Air Emissions for the FRP Industry [PDF]
Abstract: Provides information and guidance on evaluating alternatives to solvents used in tool and equipment cleaning for FRP production, to help prevent toxic air emissions.
Source: North Carolina Pollution Prevention Program
URL: http://infohouse.p2ric.org/ref/01/00904.pdf

 


The Topic Hub™ is a product of the Pollution Prevention Resource Exchange (P2Rx)

The Fiberglass Fabrication Topic Hub™ was developed by:

PPRC
PPRC
Contact email: office@pprc.org

Hub Last Updated: 9/5/2014