|
Complete List of Links for the Fiberglass Fabrication Topic Hub™ -
Total Number of Links: 37
Sorted by Title
Essential Links: 10
Best of the Rest Links: 27
Sort by Resource Type Instead
NOTE: [PDF] links require Acrobat Reader from Adobe.
Essential Links
Aqueous Cleaning Technology Review
Abstract: Review of aqueous cleaning for technical and economic viability; covers operational requirements, and future areas of development
Source: Pollution Prevention Resource Center
Resource Type: Article/report
Controlled Spraying Handbook - Composites Open Molding Spray Applications [PDF]
Abstract: (For purchase) Provides training guidelines for spray operators in the open molding companies industry, where styrene based resin and gel coat materials are used.
Source: Composites Fiber Association
Resource Type: Manual/handbook/curriculum
Establishing Waste Reduction Benchmarks and Good Manufacturing Practice for Open Mold Laminating [PDF]
Abstract: This paper illustrates how to use planned experientation to establish benchmarks for good operating practices and cost reductions in a fiberglass laminating facility.
Source: North Carolina Office of Waste Prevention
Resource Type: Article/report
Fiberglass - Pollution Prevention and General Information
Abstract: Offers information and resources on managing fiberglass fabrication wastes, regulatory issues, less-polluting alternative materials and processes, and links to additional resources.
Source: Minnesota Technical Assistance Project
Resource Type: Web site
Fiberglass Reinforced Plastics (FRP) Manufacturing
Abstract: Provides information on air emission issues (including styrene and other HAPs), compliance issues, pollution prevention resources and other FRP related issues.
Source: Indiana Department of Environmental Management
Resource Type: Web site
Guides to Pollution Prevention - The Fiberglass-Reinforced and Composite Plastics Industry [PDF]
Abstract: This manual provides information on the pollution prevention practices and technologies available to the fiber reinforced plastic (FRP) industry.
Source: Environmental Protection Agency
Resource Type: Manual/handbook/curriculum
Pollution Solutions - Fiberglass Operations
Abstract: Provides specific recommendations for preventing pollution in fiberglass operations, covering housekeeping, equipment & processes, materials, and inventory.
Source: University of Missouri Lincoln University
Resource Type: Web site
Reducing Volatile Emissions in the Fiber Reinforced Plastics (FRP) Industry [PDF]
Abstract: Describes options available to reduce acetone and styrene emissions
Source: Minnesota Technical Assistance Program
Resource Type: Fact sheet/checklist
Solvent Substitution to Reduce Air Emissions for the FRP Industry [PDF]
Abstract: Provides information and guidance on evaluating alternatives to solvents used in tool and equipment cleaning for FRP production, to help prevent toxic air emissions.
Source: North Carolina Pollution Prevention Program
Resource Type: Article/report
Waste Reduction Strategies for Fiberglass Fabricators [PDF]
Abstract: Document provides great P2 opportunities for fiberglass fabricators
Source: North Carolina Office of Waste Reduction
Resource Type: Manual/handbook/curriculum
Best of the Rest Links
A Guide for Fiberglass Operations
Abstract: This guide provides information on fiber-reinforced plastics (FRP) processes, environmental impacts, pollution prevention technologies and best management practices.
Source: Washington State Department of Ecology
Resource Type: Manual/handbook/curriculum
American Composites Manufacturers Association
Abstract: This trade association has good information about processes, and a special focus on air emissions in the composites industry. Check out their "Technical Solutions" and other resources.
Source: Composites Fabricators Association
Resource Type: Web site
Biochemical Cleaning Solvents
Abstract: Discusses need for proper cleaning prior to metal finishing; offers alternative cleaning compounds and suppliers and case studies
Source: Institute for Local Self-Reliance
Resource Type: Fact sheet/checklist
Calculating Air Emissions from Fiberglass Operations [PDF]
Abstract: Spreadsheet calculator for determining air emissions from fiberglass production, incorporates variables f low styrene, vapor-suppressed resins, molding or laminating process and other factors.
Source: Minnesota Pollution Control Agency
Resource Type: Web site
Case Study - Cobalt Boats
Abstract: How a company used changes in materials and technology to reduce waste and material consumption while saving over $100,000 annually.
Source: Kansas State University Pollution Prevention Institute
Resource Type: Case study/success story
Case Study - Grady White Boats [PDF]
Abstract: Case study on how a company replaced conventional air guns
with air-assisted airless spray guns to apply gel coating.
Source: North Carolina Pollution Prevention Program
Resource Type: Case study/success story
Case Study: Fiber Reinforced Plastics Shop Implements Light RTM to Produce Parts [PDF]
Abstract: Case study of a shop that converted 60% of open molding to closed molding (15% of operations use light RTM molding). Styrene emissions reduced by 80%.
Source: Minnesota Technical Assistance Program
Resource Type: Case study/success story
Certified Composites Technology (CCT) Training
Abstract: Online curriculum and exam provides uniform training in technology fundamentals used in open molding for composites & marine products. Focus on gel coat application, spraying, laminating, quality, and safety.
Source: American Composites Manufacturers Association
Resource Type: Manual/handbook/curriculum
Clean Manufacturing Technology Institute
Abstract: Purdue University's site with links to clean manufacturing technologies to help industry improve environmental as well as business performance
Source: Center for the Environment
Resource Type: Web site
Coatings Application Research Laboratory
Abstract: CARL's purpose is to enable firms to select and implement technologies to help them meet environmental regulations at least cost in their plants, while maintaining desired surface quality.
Source: Indiana Clean Manufacturing Technology and Safe Materials Institute
Resource Type: Web site
Composite Materials Technology Center
Abstract: Fosters interaction of engineering students with industry to enhance engineering education and assist industry in developing and implementing improved production processes.
Source: Winona State University
Resource Type: Other resources
Composite Trimming and Drilling Process Improvement
Abstract: Evaluates recent advances in composite trimming and drilling for reduced cycle time and cost. (Free to SME members, $15 to non-members).
Source: Society of Manufacturing Engineers (SME)
Resource Type: Article/report
Emissions from Composites Open Molding Operations [PDF]
Abstract: Contains many resources regarding emissions from open molding fiberglass operations, including the "Unified Emission Factors", a calculator, and other reports and info.
Source: Composites Fabricators Association
Resource Type: Software/electronic tool
EPA Sector Notebook: Profile of the Plastic Resins and Man-Made Fibers Industry
Abstract: Provides information about process inputs and outputs, and environmental and regulatory implications of these materials and fiberglass processes.
Source: U.S. Environmental Protection Agency
Resource Type: Manual/handbook/curriculum
Fountain Powerboats Incorporated - Process Modification: Equipment Change [PDF]
Abstract: Case study of a fiberglass fabricator that switched from spray guns to vacuum bags to deliver resin to the mold.
Source: Waste Reduction Resource Center
Resource Type: Case study/success story
Guide to Cleaner Technologies - Organic Coating Removal [PDF]
Abstract: Describes depainting processes that have less of an environmental impact.
Source: Environmental Protection Agency
Resource Type: Article/report
Hatteras Yachts, Inc. [PDF]
Abstract: Case study of a boat builder that reduced paint and clean-up solvent waste by installing a plural component paint spraying system.
Source: North Carolina Office of Waste Reduction
Resource Type: Case study/success story
Lean and Environment Case Study: Lasco Bathware [PDF]
Abstract: A team worked to identify numerous productivity and environmental improvements at this bathware manufacturing facility, via integration of lean and P2. Annual savings are over $140k.
Source: Washington Dept of Ecology
Resource Type: Case study/success story
Paint and Coatings Resource Center (PCRC)
Abstract: This web site provides industry, environmental and technology information for paints and coatings, and their application. Includes a live "Ask the Expert" feature.
Source: Environmental Protection Agency
Resource Type: Web site
Pollution Prevention Opportunities for Painting and Coatings Operations [PDF]
Abstract: Fact sheet provides alternative applications methods and products to reduce waste and pollution for painting and coatings.
Source: Pennsylvania Department of Environmental Protection
Resource Type: Fact sheet/checklist
Pollution Prevention Tips for Spray Painters
Abstract: Provides practical tips for spray painters to increase their transfer efficiency.
Source: Georgia Pollution Prevention Assistance Program
Resource Type: Fact sheet/checklist
Project Summary - Assessment of Styrene Emission Controls for FRP/C and Boat Building Industries [PDF]
Abstract: Alternatives for for reducing styrene emissions in the fiberglass-reinforced plastics/composites (FRP/C) and fiberglass boat building industries.
Source: P2 Pays
Resource Type: Article/report
Recycler's World - Fiberglass Recycling
Abstract: Provides a marketing venue for finding or making available fiberglass reinforced scrap and other related materials, either spent, unused inventory, scrap or waste.
Source: Recycler's World
Resource Type: Web site
Reduction of Pollution and Hazardous Wastes: an Overview of Fiberglass Molding [PDF]
Abstract: This presentation provides background information on molding and spraying techniques.
Source: P2 Pays
Resource Type: Proceedings
Reports on FRP and Light-RTM Manufacturing Technologies Tested at the Coatings Applications Research Laboratory (CARL)
Abstract: Series of reports on various fiberglass technologies that may reduce emissions and waste related to fiberglass processes.
Source: Coatings Applications Research Laboratory (CARL)
Resource Type: Other resources
Small Business Waste Reduction Guide - Fiber-Reinforced Plastics [PDF]
Abstract: Case study for using low styrene emission resins
Source: Enviro$ense
Resource Type: Case study/success story
The Coatings Guide Cost Tool
Abstract: This tool can help identify and compare costs involved in converting an existing coating processes to accommodate a new coating technology.
Source: Research Triangle Institute
Resource Type: Software/electronic tool
|
